Owner`s manual

Appendix A: General Troubleshooting Guide

Problem:

After installing Mia, one or more of your peripheral devices no

longer functions properly.

Solution

: During the installation of your Mia, it is possible that an interrupt

conflict was created. Please see

Appendix B: Resolving Interrupt

Conflicts

for more information on this topic.

Problem

: You installed Mia and restarted Windows. Now Windows

indicates that it has found new hardware and wants you to install a driver

for it. This hardware was working perfectly well before you installed Mia

and the driver for this hardware was already installed.

Solution:

It is possible that during the installation process you moved an

existing card from one slot to another. Windows keeps track of installed

devices, not only by peripheral type, but also by physical location. In

moving a card from one slot to another, Windows will no longer recognize

the card as one for which a driver is installed. You must re-install the driver

for the card that was moved.

Problem

: You installed multiple Mias, and you get several error messages

telling you that Windows is unable to open the Mixer Library.

Solution:

You can ignore these error messages and click “OK”. Now

restart Windows. After you restart, everything should work normally. The

error messages only appear when you install an additional Mia. This will be

fixed in a future driver release.

Problem

: You are unable to get your DAT recorder to recognize Mia’s

S/PDIF output.

Solution:

Digital information is transmitted in either of two modes,

“professional” or “consumer.” The

professional

mode is usually

implemented in devices that are likely to be used in professional recording