Owner`s manual

output devices vary, so may the settings you’ll need to use to maximize

performance.

Use the Multitrack Settings shown above as a starting place when

adjusting your system to optimize the performance of Cool Edit Pro.

Cool Edit Pro will take more time performing background mixing when you

have your tracks assigned to multiple sets of Mia’s outputs. In this scenario,

Cool Edit Pro creates a separate mix for each output device (each Mia

channel-pair). This additional mixing demands more processing power from

your computer. This could result in longer mix times and possible skipping

during playback. If your system is performing sluggishly, you can

temporarily assign all tracks to a single channel-pair while monitoring to

speed things up. When doing so, it is recommended that you check

32-bit

Pre-mixes

mode in the

Options/Settings

Multitrack

screen. When

monitoring to multiple output devices,

16-bit Pre-mixes

is the

recommended mode.

Note that the 16-bit and 32-bit modes are playback settings only; that is, the

data on your disk remains at the resolution at which it was recorded.