Owner`s manual

ASIO control panel – Mac OS 8/9, all products

Say, for example, you have a Layla24 and a Gina24. Congratulations on

your superb taste in purchasing not one but two Echo products.

However, say you set Layla24 to ADAT mode and Gina24 to S/PDIF mode.

In ADAT mode, Layla24 will be limited to 48 kHz, while Gina24 in S/PDIF

mode will be able to go up to 96 kHz.

This, in turn, presents the ASIO driver with a problem. If you’re trying to

use both Layla24 and Gina24 at the same time, should ASIO applications be

allowed to use 96 kHz?

The solution is the check box in the ASIO control panel (which was the

whole point of this discussion, remember?). If you check the box, only the

Gina24 will be listed in your ASIO application since it’s the only hardware

that can currently handle 96 kHz. If you uncheck the box, both Layla24 and

Gina24 will be listed, but your ASIO application won’t be allowed to use 96

kHz.

ASIO control panel – Mac OS 8/9, all products