Owner`s manual

Audio connections – MiaMIDI

Connecting to MiaMIDI

Analog Inputs and Outputs

MiaMIDI has two analog outputs (OUT1 and OUT2) and two

analog inputs (IN1 and IN2) on the back. The input and output

connections can accept balanced or unbalanced jacks via ¼”

connectors. By default, both the inputs and outputs are set to

receive or send a +4 dBu signal. You can also select –10 dBV

for each individual input and output (see the description of the

console, below).

For optimum performance it is recommended that you use

balanced signals when connecting to MiaMIDI’s analog

connectors. MiaMIDI uses TRS connectors (tip, ring, sleeve)

for connecting balanced line level signals.

The three sections of a TRS connector are used to transmit the

three components of a balanced signal (T = plus, R = minus, S =

ground). MiaMIDI will also accommodate the two conductor unbalanced

style connector.

Audio connections – MiaMIDI