Owner`s manual

Audio connections – Mia

Connecting to Mia

Analog Inputs and Outputs

Mia has two analog outputs (OUT1 and OUT2) and two

analog inputs (IN1 and IN2) on the back. The input and

output connections can accept balanced or unbalanced

jacks via ¼” connectors. By default, both the inputs and

outputs are set to receive or send a +4 dBu signal. You

can also select –10 dBV for each individual input and

output (see the description of the console, below).

For optimum performance it is recommended that you use

balanced signals when connecting to Mia’s analog

connectors. Mia uses TRS connectors (tip, ring, sleeve)

for connecting balanced line level signals.

The three sections of a TRS connector are used to

transmit the three components of a balanced signal (T =

plus, R = minus, S = ground). Mia will also accommodate

the two conductor unbalanced style connector.

Audio connections – Mia