Owner`s manual

Audio connections – Gina24

A cable was supplied with your Gina24 for this purpose. This custom made

cable is manufactured to certain specifications; if you need to replace it, you

should only use a replacement cable from Echo.

Please Note: The Gina24 cable is NOT interchangeable with Darla24

or Gina (20-bit) cables.

ADAT / S/PDIF optical I/O

Next to the COMPUTER connector is a pair of connectors labeled

OPTICAL, IN and OUT. These connectors are used to transmit digital

audio data via an optical signal.

You can use this port for ADAT (8 channels) or for optical S/PDIF (stereo)

I/O.

Note: Gina24 is only capable of transmitting or receiving one type of

digital signal at a time. You must choose either ADAT optical or

S/PDIF (optical or RCA); you cannot use both simultaneously. The

Digital Mode Switch can be found in the Gina24 Console. For more

information, please refer to the console section of this manual.

Audio connections – Gina24