Owner`s manual

Audio connections – Gina24
33
Connecting to Gina24’s Audio Interface
The front and back panels of Gina24’s audio interface contain a wide variety
of connections that allow great flexibility in the operation of Gina24. To
achieve the optimal performance with Gina24, it is critical that the
appropriate cabling and connectors are used.
Analog Inputs and Outputs
Gina24 has two analog inputs and eight analog outputs on the front panel.
The input and output connections can accept balanced or unbalanced jacks
via ¼” connectors. By default, the inputs and outputs are set to receive or
send a +4 dBu signal. You can also select –10 dBV for each individual
input and output (see the description of the console, below).
Gina24’s front panel also has a ¼” headphone output jack with a
corresponding volume knob which monitors analog outputs 1 and 2.
The Computer Connector
On the back panel of the Gina24 audio interface box is a connector labeled
COMPUTER. It is the point at which the audio interface connects to the
Gina24 PCI card inside your computer.
Audio connections – Gina24