Owner`s manual

23
Input Levels
The
Input Levels
are located in the upper portion of the Console surface.
Each input (and output) has a nominal level switch that can be found in the
Options
menu. This allows you to switch between professional (+4dBu)
and consumer (–10dBV) levels. This way you can connect either
professional or consumer gear to each input (and output). Make sure to set
the nominal level switches to match the equipment that you have connected
to Layla24’s inputs (and outputs).
Monitor Channels
Below the
Input Levels
are the
Monitor Channel
controls. The
Monitor
Channel
controls allow you to monitor the input signals via any of the
available outputs on your Layla24. Each input channel has a corresponding
monitor channel directly below it on the Console. At the top of each monitor
channel is a button that allows you to selectively
Mute
each channel.
Directly below that is a pan control that will pan between the two channels
in the designated stereo output pair. In the middle you will find a fader that
determines how much of the input signal is sent to the designated stereo
output pair. Below the fader is a display that shows the currently selected
level of attenuation. In addition to using the fader, you can change this level
by clicking in the display, typing, and then pressing
return
on your
keyboard. There is also a group of numbered buttons on the bottom left.
These buttons allow you to select which set of monitor controls will be
displayed.