Owner`s manual

21
4.
Verify that your MIDI devices are recognized.
This window
recognizes any MIDI devices (like synthesizers) currently attached to
your system through your MIDI hardware (like Layla24). In the example
you can see that an MU5 Tone Generator is attached to the system
through Layla24. Scroll down and make sure everything is OK. If there
is a problem, or you need to edit your setup, then refer to your OMS
manual for instructions. If all is well, click
OK
.
5.
Save the new studio setup.
Now you will be asked to save the new
studio setup. You can overwrite your old setup with the same name or
create a new one. Click
Save
when you’re done and you’ll see a window
displaying your new setup.
6.
Test it.
If you want to test your new setup, go to the
Studio
menu and
click
Test Studio
. Your mouse pointer will turn into a musical note. In
the Setup window, click on a tone generator or synthesizer. If it’s turned
on and hooked up properly, then you should hear a sound coming out of
the MIDI device’s outputs. If you do, then you’re all done. We hope you
enjoy the Layla24 multitrack digital audio recording system.
This completes the installation of the Layla24 hardware and software.