Owner`s manual

16
Running the Echo24 Card Installer
Now that you have completed the hardware installation, you need to run the
installer for Layla24 to interact properly with the Mac OS and your ASIO-
based recording software.
1.
Power up.
Turn on the power to the Layla24 box and then power up
your Macintosh.
2.
Start the Installer.
Insert the Layla24 Installation CD into your CD-
ROM drive. Double click the icon called
Install Echo24 Card
. Click the
Continue
button. Read the
Readme and Installation
guide that appears
so that you will be aware of any important updates. If you want to read it
later, you are given the option to
Print…
or
Save As…
When you are
done reading just press the
Continue
button.
3.
Install software.
Now you will be able to choose where the Echo24
Console software is installed. The default setting will place the Echo
folder in your main hard drive. When you are ready, click the
Install
button. The installer will now create an Echo folder where you told it to
and place the Echo24 Console and the ASIO Echo24 driver inside it.