Owner`s manual

Caution: Never connect the rack-mount interface to the computer while

either the interface or your computer is turned on.

You can now attach external audio devices to the interface box.

Layla24 can accommodate eight analog input signals and can generate

eight independent analog output signals. In addition, Layla24 provides

stereo S/PDIF digital input and output via coaxial RCA or optical

connectors, and eight channels of ADAT optical I/O. The analog and

digital inputs and outputs on Layla24 are simultaneously active, except

that the digital mode must be set to either S/PDIF or ADAT.

The S/PDIF

and ADAT I/O cannot be used simultaneously

. This allows you to record

up to 16 channels of audio (eight analog and eight digital) while playing

back 16 channels (eight analog and eight digital) in ADAT mode, or

record up to 10 channels (eight analog and two digital) while playing

back 10 channels (eight analog and two digital) in S/PDIF mode.

Additional information on attaching external devices to Layla24 may be

found in the

Connecting to Layla24’s Rack-mount Audio Interface

section.

(NOTE: When connecting devices to the S/PDIF jacks on Layla24, do not

use standard analog RCA audio cables. For reliable S/PDIF operation,

75ohm coaxial video cables are recommended).