Owner`s manual

Cubasis VST – all products

2. Pull down the ASIO Device pop-up menu, and select your ASIO driver; if you

installed the VxD drivers, select “ASIO Echo Layla24/Mona/Gina24/Mia,” or

if you installed the WDM drivers, select “ASIO Echo WDM.” In simple terms,

the ASIO Device is the mechanism that allows audio data to be transferred

between Cubasis VST and your Echo product.

3. Close the System dialog by clicking OK.

Choosing audio playback and record channels

Pull down the Audio menu and select “VST Channel Mixer.” In the bottom right-

hand corner of the VST Channel Mixer window, you can select the pair of stereo

outputs on your Echo hardware where you want to send your audio. Click on the

“pull down” menu below the Master faders, and select the stereo pair of outputs

that you have connected to your audio monitors, speakers or external mixing

board. For example, if you have your speakers connected to outputs 1&2 on your

Echo hardware, choose your outputs 1&2 within this “pull down” menu.

Note:

By default, Cubasis VST will activate your first set of stereo inputs

on your hardware. Also, please keep in mind that Cubasis VST is a “stereo

input and stereo output program.”; that is, you can only use a single pair of

outputs and a single pair of inputs at any given time.

There are more detailed instructions for Cubasis VST in the “Operation Manual”

and “Steinberg on the Web.” Both sources can be found in the Start menu’s

“Programs” list.