Owner`s manual

VxD console- Mia

VxD console – Mia

Let’s start simple. Suppose that Mia is the only audio device used in your system.

Since you have no other devices to synchronize with, simply select “Internal” for

Mia’s input clock. Mia will then use its own clock to control its operation.

Now a little more complicated set-up: You have two Mias connected. Simply set

Mia #1 to “Internal” for its input clock. Now connect the first Mia to the second

one via an S/PDIF cable running from DOUT on Mia #1 to DIN on Mia #2. Now

select Digital for Mia #2’s clock source. Your Mias will now operate in unison.

No matter how many devices you are synchronizing, the concept is essentially the

same. You are merely “daisy-chaining” devices together using compatible clocks.

One device will operate as the source of the master clock, with each successive

device using that clock to sync.