Owner`s manual

VxD console- Mia

VxD console – Mia

Virtual Output Controls

The middle of the console is dedicated to the

controls for virtual output channels one through

eight. The output controls look like the monitor

controls (Gang, Mute, Solo, & faders), except that

there are also meters that show the levels for each

of the virtual outputs. Just like the monitor

controls, the output faders can be reset to default

by pressing the Ctrl button and left clicking on the

fader.

The controls for mixing virtual outputs 1/2 and 3/4

to the analog outputs are shown above. Just like

the monitor controls, there are duplicate controls

for mixing to the digital outputs that are not shown.

To view these controls, select the “Digital” output

controls button at the bottom of the console.

All virtual output sliders default to 0 dB when the

console is first installed. Since multiple outputs

are being added together, you may need to lower these levels to avoid clipping at

the analog or digital output. Also, when the console is first installed virtual

outputs 1/2 are routed to the analog outputs and virtual outputs 3/4 are routed to

the digital outputs.