Owner`s manual

VxD console – Gina24, Layla24, and Mona

Layla24 and Mona only have the Esync output connectors, and Mia has no Esync

connectors. Layla24/Mona/Gina24 is always outputting Esync clock.

Now, let’s take a look at some example configurations and how you might set

them up from a synchronization standpoint.

Let’s start simple. Suppose that Layla24 is the only audio device used in your

system. Since you have no other devices to synchronize with, simply select

Internal for Layla24’s input clock. Layla24 will then use its own clock to control

its operation.

Now a little more complicated set-up: You have two Layla24s connected. Simply

set Layla24 #1 to Internal for its input clock. Now connect the first Layla24 to the

second one via a BNC cable running from Word Clock Out on Layla24 #1 to

Word Clock In on Layla24 #2. Now select Word for Layla24 #2’s input sync. The

second Layla24 will slave to the first one and your Layla24s will now operate in

unison.

No matter how many devices you are synchronizing, the concept is essentially the

same. You are merely “daisy-chaining” devices together using compatible clocks.

One device will operate as the source of the master clock, with each successive

device using that clock to sync.