Owner`s manual

VxD console – Gina24, Layla24, and Mona

Setting Clock Sources and Destinations

At the very bottom of the Console there are buttons that allow you to select the

synchronization clocks. The console program will detect which input clocking

options are available, and automatically disable those that are unavailable.

Depending on what external devices you have connected, you may have as many

as four out of five options available (Layla24/Mona).

Input clocks, Digital Mode Switch & View ADAT Ctrls are at the bottom of the Console.

If you are unsure which clock synchronization selections are appropriate for your

installation, be sure to read the next section, which deals with the types of

supported clocks.

Synchronizing Multiple Devices

Layla24/Mona/Gina24/Mia is designed to work alongside other audio equipment.

If you are planning on using your Echo hardware with other audio equipment,

please note the following:

The Windows drivers included in this package support multiple Echo cards within

the same system. In addition, your new Echo hardware will operate alongside

other Echo products. Echo hardware can also peacefully coexist with audio

equipment from other manufacturers, but be aware that operating alongside

another product is not the same as operating with it. In order for accurate

synchronization to occur, the other audio product(s) in your system must support a

synchronization mode that is compatible with your particular Echo hardware.

Without such synchronization, the individual pieces of equipment will act

independently of each other. This scenario may be fine for some musical

applications; however, it is not appropriate for situations where sample-accurate

synchronization is required or that will be affected by clock drift.