Owner`s manual

WDM console – all products

Screenshot of Layla24 Console3 main window - other Echo hardware will work similarly.

Bus select

The bus select panel is the area outlined in green. Eight different output busses

are shown here: four analog busses in the top row and four digital busses on the

bottom row. Each bus has its own button marked with either an A or D (Analog or

Digital) and a channel number pair. The button in the “down” position is the

currently active bus. All monitor controls remain in effect even when not

displayed by maintaining a level setting for each monitor path it controls.

Clicking on an output bus button simply selects the settings that are displayed. In

this case Analog 1-2 (A 1-2) is the active bus. This means all input monitor

parameters such as volume, pan, and mute apply to the audio coming out Analog

outputs 1 and 2 of Layla24. To select an output bus, click on one of the buttons.

Alternatively, you can use the function keys F1 through F8.

Master output bus control

The master bus control is the area outlined in purple. At the bottom is the label

“Analog out 1-2.” This indicates you are currently controlling everything mixed

to analog outputs 1 and 2. These channels correspond to the currently selected

button on the bus select panel.