Owner`s manual

Audio Software – Gina24, Layla24, and Mona

The WDM drivers work a little differently, depending on the current digital mode.

Gina24, Layla24, and Mona have a digital mode switch that lets you set how the

hardware transmits and receives digital audio signals. The digital mode switch

can be set to S/PDIF RCA, S/PDIF optical, or ADAT optical.

The following is a table showing what the WDM wave devices do for each digital

mode:

Device

S/PDIF RCA

S/PDIF optical ADAT optical

Layla24 1/2 Digital S/PDIF S/PDIF ADAT 1/2

Layla24 3/4 Digital not used not used ADAT 3/4

Layla24 5/6 Digital not used not used ADAT 5/6

Layla24 7/8 Digital not used not used ADAT 7/8

In other words, if you want to play or record using S/PDIF, set the hardware to

either S/PDIF RCA or S/PDIF optical and configure your software to use “Layla24

1/2 Digital.” Since S/PDIF is stereo (two channels), digital channels 3 – 8 are not

used.

If you want to play or record using ADAT optical, set the hardware to ADAT

optical mode and configure your software to use all of the digital channels.

Please refer to the Console section of the manual for more information on digital

modes.