Product manual

WDM - Digital I/O for Gina24, Layla24, and Mona

S/PDIF and ADAT connections are treated differently with the WDM driver than they have been in

the past. Previously, S/PDIF and ADAT devices were listed separately even though they were

not available at the same time. With WDM, the hardware is considered to have 8 generic digital

inputs and outputs. If you are in S/PDIF mode, then the first two digital inputs and outputs are

used for S/PDIF and the rest don’t do anything; they record silence and playback data is thrown

away. If you are in ADAT mode, the 8 digital inputs and outputs correspond to the 8 ADAT inputs

and outputs.

In other words:

• In either S/PDIF mode, S/PDIF goes in and out on Digital 1/2. Digital 3 through 8 are

not used.

• In ADAT mode, the ADAT channels go in and out on Digital 1 through 8.