Owner`s manual

6
System Requirements
In order to use Gina24 you’ll need the following:
• An IBM-PC or compatible computer with PCI architecture
expansion slots (version 2.1 PCI), a genuine Intel Pentium or faster
CPU, a motherboard with an Intel chipset, and minimum 64Mb
RAM (more highly recommended) running Windows 95 or
Windows 98
• A fast, high-capacity IDE or SCSI hard disk drive
• Peripheral audio equipment, such as a microphones, studio
monitors, musical instruments, mixer, etc.
Gina24 Installation
Complete Gina24 installation consists of performing a system check,
disabling Windows system sounds, installing the Gina24 PCI card,
connecting the audio interface to the card, installing the Gina24 Windows
drivers into your system and, if necessary, installing a multitrack audio
recording/editing application.
System Check
The first thing you should do is check the display settings for your
computer. The Gina24 Echo Console software requires a minimum
resolution of 800X600 with small fonts to display properly.
To check your display settings, go to the Windows
Control Panel
, which
can be found under
Settings
from the
Start
button. In the
Control Panel
window you will find an icon titled “
Display
.” After double clicking on
this icon, the
Display Properties
window will appear. Click the
Settings
tab at the top right of this window. At the bottom right of the window you
will see a box labeled
Desktop area
or
Screen area
. Inside the box is a
slider that allows you to select different resolutions for your monitor. You
should set the resolution to at least 800x600 and click the
Apply
button.