Owner`s manual
31
General - Sync Wave Devices
This is mainly for developers who are using tools like Visual Basic or
Delphi and want the inputs and outputs to be totally independent. Unless
you have a good reason to turn it off, you should leave this switch on.
If you have a program that is telling you that our hardware isn't full duplex,
chances are you can fix this by either disabling this switch or enabling
Multi-client audio
(see below).
Sample Rate Lock
These controls allow you to enable or disable the
Sample Rate Lock
feature, as well as set the sample rate you want to lock to. While the sample
rate is locked, all sample rate change requests from applications will be
ignored and the card will remain at that sample rate no matter what.
This feature is most useful in
Multi-client audio
mode (see below).
Suppose you have locked the sample rate to 44100. If you are recording a
project at 44100 and another sound tries to play at, say, 22050, the sample
rate won't change. Sample rate locking only applies while Gina24 is set to
Internal clock. This setting defaults to
unlocked
.