Owner`s manual

24
Setting Clock Sources and Destinations
At the very bottom of the Console there are buttons that allow you to select
the synchronization clocks that are used by Gina24. The console program
will detect which input clocking options are available, and automatically
disable those that are unavailable. Depending on what external devices you
have connected to Gina24, you may have as many as four options here.
Input clocks, Digital Mode Switch & View ADAT Ctrls are at the bottom of the Console.
If you are unsure which clock synchronization selections are appropriate for
your installation, be sure to read the next section, which deals with the types
of clocks that Gina24 supports.
Synchronizing Multiple Devices
Gina24 is designed to work alongside other audio equipment. If you are
planning on using Gina24 with other audio equipment, please note the
following:
The Gina24 Windows drivers included in this package support multiple
Gina24s within the same system. In addition, your new Gina24 will operate
alongside Mona, Layla, Layla24, Gina, Darla and Darla24. Gina24 can also
peacefully coexist with audio equipment from other manufacturers, but be
aware that operating
alongside
another product is not the same as operating
with
it. In order for accurate synchronization to occur, the other audio
product(s) in your system must support a synchronization mode that is
compatible with Gina24. Without such synchronization, the individual
pieces of equipment will act independently of each other. This scenario may
be fine for some musical applications; however, it is not appropriate for
situations where sample-accurate synchronization is required.