Owner`s manual

19
The Echo Console
Included with your Gina24 is a “virtual control surface” application called
the Echo Console. Every time you start Windows you will see it flicker
across the screen as it loads. Then it will minimize itself to the taskbar. The
Console allows you to control the audio I/O and clocking functions of
Gina24, and it brings these controls to a single easy-to-use location. From
the console you can control the output levels, select synchronization clocks,
select the digital mode, and adjust input monitoring.
The Echo Console software was automatically installed at the same time
that you installed the Gina24 driver for Windows 95/98. If installation was
successful, you should see a red capital letter
G
in your Windows 95/98
taskbar (typically in the bottom right-hand corner of your screen). Double-
clicking on the “
G
” will activate the console program. It should look like
this: