Owner`s manual

18
Gina24 Audio Input & Output Devices
The Gina24 driver installs into your computer as a series of stereo .WAV
devices. Pulling down the
Preferred Device
menu in the
Control
Panels/Multimedia/Audio Playback
section will reveal the available
Gina24 devices. You will be able to select from:
Gina24 1/2 Analog Playback
Gina24 3/4 Analog Playback
Gina24 5/6 Analog Playback
Gina24 7/8 Analog Playback
Gina24 S/PDIF Playback
Gina24 1/2 ADAT Playback
Gina24 3/4 ADAT Playback
Gina24 5/6 ADAT Playback
Gina24 7/8 ADAT Playback
In the
Recording
section, the following choices will be available:
Gina24 1/2 Analog Record
Gina24 S/PDIF Record
Gina24 1/2 ADAT Record
Gina24 3/4 ADAT Record
Gina24 5/6 ADAT Record
Gina24 7/8 ADAT Record
You’ll find these same input and output options available when using your
audio record/editing software, with the devices assignable on a per-track
basis. See your software owner’s manual for details on how to make these
device assignments. Instructions for making these assignments in Cool Edit
Pro

Special Edition can be found in the special “
Cool Edit Pro
”
section at the back of this manual.
NOTE: Although both S/PDIF and ADAT devices are listed and selectable,
they are not simultaneously active. The
Digital Mode Switch
in the
Echo
Console
determines which digital devices are currently active.
This completes the installation of the Gina24 hardware and software.