Owner`s manual

Installing the Gina24 Software Drivers

Now that you have completed the hardware installation, you need to install

the software drivers that allow Gina24 to interact properly with Windows

95/98 and your audio recording application.

Turn on the power to your computer’s CPU. After Windows 95/98 starts up,

it will automatically sense the newly installed Gina24 card and indicate, via

a pop-up Install Wizard window, that new hardware has been found. At this

point, you should insert the Gina24 CD-ROM disc.

If you are using the original version of Windows 95:

Within the Install Wizard window are several options. Select the option

Driver from disk provided by hardware manufacturer

. The computer

will now prompt you for the location of the driver files. These files are

located in the root directory of the Gina24 CD-ROM. Click the

Browse

button in the Install Wizard; this will cause the

“Install From Disk”

window to appear. In the field labeled

“Copy manufacturer’s files from:”,

enter the path

D:\

(depending on your system configuration, your CD-ROM

drive may use a letter other than “D”). Click on

to complete the

installation. Now skip over the next two paragraphs.

If you are using Windows 95 OSR2:

After you have inserted the Gina24 CD-ROM disc and clicked

, you’ll

see the message, “Windows found the following updated driver for this

device, Gina24 by Echo.” Click on the

Finish

button and Windows will

attempt to locate the drivers on a disk labeled “Echo Install Disk.” This is

caused by a bug in Windows 95 OSR2. So what you’ll see is a not-so-nice

error message marked with a big red X. Ignore Windows’ rude behavior and

click on the OK button. This will bring you to the

Copying Files . . .

window. Within the window is a field labeled

Copy Files From:

into which

you’ll need to enter the path name for the Gina24 drivers. Type in the letter

name of your CD-ROM drive followed by :\ (for example,

D:\

). Click on

, and Windows will complete the driver installation routine. Now skip

over the next paragraph.