Owner`s manual

Synchronization – all products

Now let’s take a look at some sample configurations and how you might set

them up from a synchronization standpoint.

Let’s start simple. Suppose that Layla24 is the only audio device used in

your system. Since you have no other devices to synchronize with, simply

select Internal for Layla24’s input clock. Layla24 will then use its own

clock to control its operation.

Now a little more complicated set-up: You have two Layla24s connected.

Simply set Layla24 #1 to Internal for its input clock. Now connect the first

Layla24 to the second one via a BNC cable running from Word Clock Out

on Layla24 #1 to Word Clock In on Layla24 #2. Now select Word for

Layla24 #2’s input sync. The second Layla24 will slave to the first one and

your Layla24s will now operate in unison.

No matter how many devices you are synchronizing, the concept is

essentially the same. You are merely “daisy-chaining” devices together

using compatible clocks. One device will operate as the source of the master

clock, with each successive device using that clock to sync.