Owner`s manual

Console – Mia

Here’s a picture of the console for Layla24 (Gina24 and Mona are similar)

Bus select: The bus select panel is the area outlined in green. Eight

different output busses are shown here: four analog busses in the top row

and four digital busses on the bottom row. Each bus has its own button

marked with either an A or D (Analog or Digital) and a channel number

pair. The highlighted button is the currently active bus. All monitor

controls remain in effect even when not displayed by maintaining a level

setting for each monitor path it controls. Clicking on an output bus button

simply selects the settings that are displayed. In this case, Analog 1-2 (A 1-

2) is the active bus. This means all input monitor parameters such as

volume, pan, and mute apply to the audio coming out Analog outputs 1 and

2 of Layla24. To select an output bus, click on one of the buttons.

Master output bus control: The master bus control is the area outlined in

purple. At the bottom is the label “Analog out 1-2.” This indicates you are