Owner`s manual

Audio connections - Mona

ADAT/S/PDIF optical I/O

Next to the COMPUTER connector is a pair of connectors labeled OPTICAL, IN

and OUT. These connectors are used to transmit digital data among digital audio

devices via an optical signal.

You can use this port for ADAT (8 channels) or for optical S/PDIF (stereo) I/O.

Note:

Mona is only capable of transmitting or receiving one type of digital

signal at a time. You must choose either ADAT optical or S/PDIF (optical or

RCA); you cannot use both simultaneously. Please refer to the Console

section of this manual for more information.