Owner`s manual

Audio connections - Mona

XLR jack outputs a +4 dBu (balanced) signal. Both connectors are active at all

times, so the output signal will always go out of both jacks.

The Computer Connector

Next to the analog inputs and outputs is a connector labeled COMPUTER. This

connector is known as a DB-9, and is similar to the serial port on a PC. It is the

point at which the audio interface connects to the Mona PCI card inside your

computer.

A cable was supplied with your Mona for this purpose. This custom made cable is

manufactured to certain specifications; if you need to replace it, you should only

use a replacement cable from Echo.