Owner`s manual
Table Of Contents
- Darla PC Manual V1.6 Title Page
- Table of Contents
- Introduction
- Darla Installation
- The Echo Console
- The File Menu
- The Edit Menu
- The Session Menu
- The Monitors Menu
- Console Controls
- Monitor Controls
- Output Controls
- Adjusting Record and Playback Levels
- Synchronizing Multiple Devices
- Console Keyboard and Mouse Shortcuts
- Additional Configuration Settings
- The "Monitor During Playback" Control
- SAW Compatability Mode
- Show Echo Console on the Taskbar
- ASIO Driver Installation
- Installing Cool Edit Pro - Special Edition
- Cool Edit Pro: Assigning Darla's Inputs & Outputs
- Cool Edit Pro: Optimizing Multitrack Performance
- Contacting Customer Service
- Appendix A: The Echo Reporter Troubleshooting Guide
- Appendix B: General Troubleshooting Guide
- Appendix C: Resolving Interrupt Conflicts
- Appendix D: An Introduction to Digital Recording
- Appendix E: Specifications
- Index
36
Appendix B: General Troubleshooting Guide
Problem:
After installing Darla, one or more of your peripheral devices no
longer functions properly.
Solution
: During the installation of your Darla, it is possible that an
interrupt conflict was created. Please see
Appendix C: Resolving
Interrupt Conflicts
for more information on this topic.
Problem
: You installed Darla and restarted Windows. Now Windows
indicates that it has found new hardware and wants you to install a driver
for it. This hardware was working perfectly well before you installed Darla
and the driver for this hardware was already installed.
Solution:
It is possible that during the installation process you moved an
existing card from one slot to another. Windows keeps track of installed
devices, not only by peripheral type, but also by physical location. In
moving a card from one slot to another, Windows will no longer recognize
the card as one for which a driver is installed. You must re-install the driver
for the card that was moved.