Owner`s manual

21
the list. For those who like using the keyboard, pressing the corresponding
number (displayed with an underline before the session name) also works.
The Monitors Menu
The
“Group Mode”
option, first on the Monitors menu, is not available for
Darla.
The
“In-Line”
option, second on the Monitors menu, is not available for
Darla.
Console Controls
Let’s take a look at the control surface. The input controls are located in the
upper left portion of the console surface. In the center of each input control
is a pair of level meters.
Above the meters at the top of each input control is the “LED” which is a
button as well. It is used to enable (green) or disable (yellow) the level
meter for this channel pair.
Monitor Controls
Below the input channels are the input monitor controls. The input monitor
controls allow you to monitor the record input signal via any of the
available outputs on your Darla. Each input channel pair has a
corresponding monitor output pair directly below it on the console. The
monitor controls look similar to the controls for input. The mute (M) and
solo (S) buttons are found at the top, and the gang (G) selection button is at