Owner`s manual

Console Controls

Let’s take a look at the control surface. The

Input Levels

are located in the

upper portion of the console surface.

Directly below the

Input Levels

is a section called

Input Trims

Unfortunately Darla does not support this function. This is only available in

the Gina and Layla audio recording systems.

Monitor Controls

Below the

Input Levels

and

Input Trims

are the

Monitor Channel

controls. The input monitor controls allow you to monitor the record input

signal via any of the available outputs on your Gina. Each input channel has

a corresponding monitor output channel directly below it on the console.

For each level meter there is a knob below it for input monitoring. Below

every knob is a display that shows the currently selected monitor level. You

can change the monitor level by clicking in the display and typing, by

clicking the arrows, or by click holding the knob and dragging right or left.

You can also zero the level by holding the

Command

button on your

keyboard and clicking the knob. Note that there is a

Mute

button for each

channel for easy muting of the monitors. There is also a group of numbered