Owner`s manual

Console Software

Audio applications see the AudioFire’s outputs listed as "Playback 1" through

"Playback 6". Using the console, you can then route the playback channels to

either the analog outputs, headphones (AudioFire2 only), or digital outputs. Each

playback pair can be independently routed to any of the outputs. You can also

duplicate playback pairs so the same audio goes to more than one set of outputs.

To change the routing, open the AudioFire Console. Select the Settings tab; near

the bottom of the window you will see the new routing control.

The AudioFire 2 Console Window: Settings Tab selected