Owner`s manual

Console Software

The AudioFire 8 Console Window: Digital Out 1-2 Tab selected.

Adjusting Playback Volume

Output volume adjustments are made in the digital domain. When you lower a

volume fader below 0dB, you are actually decreasing the number of available bits,

thereby taking away from the potential dynamic range of the system. Therefore,

we suggest that whenever possible you leave the output faders (Playback & Output

Bus) set to 0dB, and perform any necessary attenuation on your external mixer.

When the playback volume controls are set to 0dB and the input signal approaches

the maximum pre-clipping level, you can achieve the full 24-bit dynamic range of

the system.