Instruction Manual

Battery Charging
Battery Installation
Charge the battery for 3 hours for the first time. When charging have the
battery away from ALL COMBUSTIBLE MATERIALS and on a cool hard
surface. If battery becomes HOT remove and charger and let it COOL before
use. When cycle rate becomes slow, STOP shooting and remove the maga-
zine. Shoot 2 times in SEMI to clear the gun, remove the battery and recharge.
Basic Charge Time:
Battery: 1500 mAh / Charger: 300mAh = Estimated Charge Time: 5 Hours
Step 1. Gently press inward the two tabs on the Stock Pad. About 2mm
and should be clear. Pull back on the stock pad to remove.
Step 2. Insert the battery cells on either side of the crane stock. Gently pull
out the wire to expose the plug for connection.
Step 3. Slide the battery into the crane stock and tuck the fuse and plug
back into the metal tube.
Step 4. To attach the stock pad you will need to reverse the steps. Press in
on the top tab and pivot inward. Gently press on and make sure not to
damage any parts. Please notice the wires going through the slots in the
stock pad for correct install.
CAUTION: Please be gentle when removing the stock pad. The parts can be
broken if abused. The warranty does not cover abuse.
Stock Pad Tabs