Instruction Manual

Battery Charging
Battery Installation
Charge the battery for 3 hours for the first time. When charging have the
battery away from ALL COMBUSTIBLE MATERIALS and on a cool hard
surface. If battery becomes HOT remove and charger and let it COOL before
use. When cycle rate becomes slow, STOP shooting and remove the maga-
zine. Shoot 2 times in SEMI to clear the gun, remove the battery and recharge.
Basic Charge Time:
Battery: 1100 mAh / Charger: 250mAh = Estimated Charge Time: 5 Hours
Step 1. Remove the Stock Screw with the provided 3mm Allen Key. Pull the
Stock Pad off and extend the wire. There is no fuse to worry about.
Step 2. Insert the mini battery or Echo1USA Lipo and connect the plugs.
Install the stock pad and secure with the bolt.
Notes: The Stock Pad has three settings to choice from. Do not lose the tool
or bolt and nut parts. You can find and use spare parts from a hardware
store if needed.
You have the option to have the one point sling loop on the right or left side.
Use the provided 3mm Allen key to remove and switch to other side.
Sling Option