Instruction Manual BEFORE USING THIS PRODUCT, CAREFULLY READ THOUGH MANUAL AND RETAIN IT FOR FUTURE REFERENCE. ECHO1USA AUTOMATIC ELECTRIC GUNS ARE INTENDED FOR AGES 18 AND ABOVE. THIS PRODUCT MAY CAUSE SERIOUS INJURY IS MISUSED. FULL FACE PROTECTION IS REQUIRED.
The Modular Tactical Carbine 3 Master Blaster Before using this product, carefully read though manual and retain it for future reference. Echo1usa automatic electric guns are intended for ages 18 and above. This product may cause serious injury is misused. Full face protection is required. Specifications Weight Barrel Length Overall Length Barrel Caliber Ammo Capacity BB Size Feet Per Second Battery Type 5.6 lbs 247 mm 760 mm 6.06 mm 300 and 190 rounds 6 mm 360-380 fps 8.
Parts of the Gun Ambi Charging Handle Front Sight Hand Guard Pin RIS Flash Hider 14mm CCW Tac Grip Magazine Release Magwell Pin Trigger Ambi Fire Selector Motor Set Screw Rear Sight Optic Rail Rear Sling Loop Stock Pad Stock Bolt
Parts of the Gun (Contintued) Hand Guard Pin Stock Bolt Sling Bolt Ambi Fire Selector Charging Handle Hop Up Unit 3mm Allen Key Mag Release Parts Cheek Rest Screws
Battery Charging Charge the battery for 3 hours for the first time. When charging have the battery away from ALL COMBUSTIBLE MATERIALS and on a cool hard surface. If battery becomes HOT remove and charger and let it COOL before use. When cycle rate becomes slow, STOP shooting and remove the magazine. Shoot 2 times in SEMI to clear the gun, remove the battery and recharge.
Ambi Fire Selection 1. Press the magazine release to remove the magazine from the gun. SAFE: Trigger is secure and cannot fire Mag Catch BB Entrance Top Hatch BB Stop Lever BB Exit SEMI: With one trigger pull one BB is fired AUTO: Gun will fire automatically while trigger is pulled Operational Tips: If the trigger is stuck or jammed in SEMI mode please select AUTO and fire several times to reset the cut off lever. Low battery power can cause this jam. The Fire Selectors will move with ease.
Hop Up Unit Adjustment The Hop Up Unit adds a back spin to the BB to allow a longer flight path. Before use please do so in a safe location and make sure nobody is behind the target. When using different weight BBs you will have to make adjustments. When not is use please turn the Hop Up Unit off. Cut the cloth or paper towel in the size as shown above. Fold the material to fit through the loop. Adjust the length of the material to smoothly enter the barrel.
Trouble Shooting Gun is making a quiet clicking noise when trigger is pulled. Use a fully charged battery or 12v to unlock the gears. The trigger is stuck and will not pull back in SEMI mode. Switch the selector to AUTO mode, fire 2 - 3 times, and switch to SEMI. No power or noise coming from the gun. Fuse may be blown. Replace with a 20 amp or 25 amp fuse found at most auto parts stores. Bypass by sticking the connectors together. Grindy / scratchy noise when shooting. Motor height is too high or low.
