Instruction Manual

Battery Charging

Battery Installation

Charge the battery for 3 hours for the first time. When charging have the

battery away from ALL COMBUSTIBLE MATERIALS and on a cool hard

surface. If battery becomes HOT remove and charger and let it COOL before

use. When cycle rate becomes slow, STOP shooting and remove the maga-

zine. Shoot 2 times in SEMI to clear the gun, remove the battery and

recharge.

Basic Charge Time:

Battery: 1500 mAh / Charger: 300mAh = Estimated Charge Time: 5 Hours

Step 1. Gently press inward the two tabs on the Stock Pad. About 2mm

and should be clear. Pull back on the stock pad to remove.

Step 2. Insert the battery cells on either side of the crane stock. Gently pull

out the wire to expose the fuse and for easier plug connection. FUSE is

6/8th glass tube.

Step 3. Slide the battery into the crane stock and tuck the fuse and plug

back into the metal tube

Step 4. To attach the stock pad you will need to reverse the steps. Press in

on the top tab and pivot inward. Gently press on and make sure not to

damage any parts.

CAUTION: Please be gentle when removing the stock pad. The highlighted

red parts can be broken if abused. The warranty does not cover abuse.

FUSE Holder

Stock Pad Tabs