Instruction Manual

SAFE: Trigger is secure and cannot fire
SEMI: With one trigger pull one BB is fired
Fire Selection
How to use the Magazine
1. Press the magazine release to remove the magazine from the gun.
Avoid getting dirt and debris into the magazive this can cause it to
malfunction. Only use Echo1USA BBs into your Echo1USA Airsoft Rifle. The
use of .12g or ‘low grade’ BBs will damage your Airsoft Rifle and VOID the
warranty.
BB Exit
BB Stop Lever
Top Hatch
BB Entrance
Mag Catch
Magazine Wheel
Avoid getting dirt and debris into the magazive this can cause it to
malfunction. Only use Echo1USA BBs into your Echo1USA Airsoft Rifle. The
use of .12g or ‘low grade’ BBs will damage your Airsoft Rifle and VOID the
warranty.
2. Open the Top Hatch and load BBs. About 220 BBs can be loaded.
Do not force the BBs into the magazine
3. Close the Top Hatch.
4. Hold the Mag with the BB Top Hatch facing up and turn the Mag Wheel.
You will see a BB move to the BB Exit and stop. Once a BB has reached the
BB Exit continue to turn the Mag Wheel for approximately 15 more turns.
Operation Tips: Use caution when mag seems empty. There are about 30
BBs left in the loading tube even after mag is out of BBs. Turn the Mag
Wheel 7-10 times for every 30-50 BBs fired. Turning the Mag Wheel may
cause damage. For storage pull back on the BB Stop Lever to release the
remaining BBs and ensure proper operation for next use.If the mag is not
feeding correctly please aply silicone oil to the Mag Wheel and into the BB
Entrance to lubricate the moving parts.