Instruction Manual

Battery Charging
Battery Installation
Charge the battery for 3 hours for the first time. When charging have the
battery away from ALL COMBUSTIBLE MATERIALS and on a cool hard
surface. If battery becomes HOT remove and charger and let it COOL before
use. When cycle rate becomes slow, STOP shooting and remove the maga-
zine. Shoot 2 times in SEMI to clear the gun, remove the battery and
recharge.
Basic Charge Time:
Battery: 1200 mAh / Charger: 250mAh = Estimated Charge Time: 5 Hours.
Step 1. Use a fully charged stick battery and locate the hand guard
release lever.
Step 3. The highlighted red cap will slide forward and the hand guards will
come off. Now you can access the battery area. The fuse is located in the
black plastic capsule and can be unplugged to bypass the fuse.
Step 4. Place the stick battery on the top of the barrel and push the wires to
the side just a little to make room. You can use a 8.4v or 9.6v stick battery.
For use of a lipo battery you will need to use the AK type stick battery or our
buffer tube style lipo.
Step 2. Press the hand guard release lever in towards the center of the gun
and then pivot forward. Keep the lever parallel with the outer barrel and then
wiggle and slide the unit forward to loosen the hand guards.