Instruction Manual

Hop Up Unit Adjustment
Hop Up Unit Cleaning
1. Spray silicone oil into the hop up chamber from the wagwell for 1 sec. and
fire 10-15 BBs to oil inner barrel and hop up parts.
2. Fire 2 shots with magazine removed to clear gun of BBs and disconnect
battery.
3. With a twisting motion gently push the cloth and rod down the barrel.
Repeat 2-3 times until clean
NOTE: You can apply silicone oil directly to the cloth as well.
If there is too much oil in barrel the BB trajectory will be unstable
Only use Echo1USA BBs into your Echo1USA Airsoft Rifle. The use of .12g or
‘low grade’ BBs will damage your Airsoft Rifle and VOID the warranty.
How to unjam the gun.
Turn Hop Up Unit OFF - Disconnect Battery - Remove Magazine
How to clean the inner barrel.
Turn Hop Up Unit OFF - Disconnect Battery - Remove Magazine
1. Use the Angled end of the cleaning rod to push the BB backwards and out
through the Hop Up Unit.
2. Make sure to have the angled end facing down and silicone oil will help
loosen the BB.
NOTE: If you continue to fire the gun with a jam you will cause more damage.
Cut the cloth or paper towel in the size as shown above. Fold the material to
fit through the loop. Adjust the length of the material to smoothly enter the
barrel. otherwise too much material will get jammed in the inner barrel and
can cause the hop up bucking to get out of place.
Step 1. To access the Hop Up Unit pull back the Charging Handle. The
Charging Handle has a latch on the left side. Please be gentle when pulling
back.
Step 3. To adjust the hop up unit you will have to turn the wheel. Turning UP
will add more hop up effect and turning DOWN will turn the hop up unit off.
Once you find the best setting you can release the charging handle.
Step 2. Hold the Charging Handle back to open the Hop Up area and make
adjustments.
The Hop Up Unit adds a back spin to the BB to allow a longer flight path.
Before use please do so in a safe location and make sure nobody is behind
the target. When using different weight BBs you will have to make adjust-
ments. When not is use please turn the Hop Up Unit off.