Instruction Manual

Ambi Fire Selection
Operational Tips:
If the trigger is stuck or jammed in SEMI mode please select AUTO
and fire several times to reset the cut off lever. Low battery power can
cause this jam.
The Fire Selectors will move with ease. Forcing the Fire Selectors may
cause damage.
How to use the Magazine
Avoid getting dirt and debris into the magazive this can cause it to malfunction.
Only use Echo1USA BBs into your Echo1USA Airsoft Rifle. The use of .12g or
‘low grade’ BBs will damage your Airsoft Rifle and VOID the warranty.
SAFE:
Trigger is secure and cannot fire
SEMI:
With one trigger pull one BB is fired
AUTO:
Gun will fire automatically while
trigger is pulled
1. Press the magazine release to remove the magazine from the gun.
2. Open the Top Hatch and load BBs. About 300 BBs can be loaded.
Do not force the BBs into the magazine
3. Close the Top Hatch.
Operation Tips:
Use caution when mag seems empty.
There are about 30 BBs left in the loading tube even after mag is out of BBs.
Turn the Mag Wheel 7-10 times for every 30-50 BBs fired.
Turning the Mag Wheel may cause damage.
For storage pull back on the BB Stop Lever to release the remaining BBs and
ensure proper operation for next use.
If the mag is not feeding correctly please aply silicone oil to the Mag Wheel
and into the BB Entrance to lubricate the moving parts.
4. Hold the Mag with the BB Top Hatch facing up and turn the Mag Wheel.
You will see a BB move to the BB Exit and stop. Once a BB has reached the
BB Exit continue to turn the Mag Wheel for approximately 15 more turns.
BB Exit
BB Stop Lever
Top Hatch
BB Entrance
Mag Catch
Magazine Wheel