Instruction Manual

Trouble Shooting Notes
Use a fully charged battery or 12v to unlock the gears.
Gun is making a quiet clicking noise when trigger is pulled.
Switch the selector to AUTO mode, fire 2 - 3 times, and switch to SEMI.
The trigger is stuck and will not pull back in SEMI mode.
Fuse may be blown. Replace with a 20 amp or 25 amp fuse found at most
auto parts stores. Bypass by sticking the connectors together.
No power or noise coming from the gun.
Motor height is too high or low. Use a 1.5mm allen key or flat head screw
driver to tighten or loosen until the sound goes away.
Grindy / scratchy noise when shooting.
Barrel is jammed. Please check with Hop Up page to unjam.
BBs jamming or not shooting
Please contact [e-mail] on our home page for more help.
Now working after trouble shoot.