Instruction Manual

Stock Pad Tabs
Battery Charging
Battery Installation
Charge the battery for 3 hours for the first time. When charging have
the battery away from ALL COMBUSTIBLE MATERIALS and on a cool
hard surface. If battery becomes HOT remove and charger and let it
COOL before use. When cycle rate becomes slow, STOP shooting and
remove the magazine. Shoot 2 times in SEMI to clear the gun, remove
the battery and recharge.
Basic Charge Time:
Battery: 1500 mAh / Charger: 300mAh = Estimated Charge Time: 5 Hours
Step 1. Gently press inward the two tabs on the Stock Pad. About 2mm
and should be clear. Pull back on the stock pad to remove.
Step 2. Insert the battery cells on either side of the crane stock. Gently pull
out the wire to expose the fuse and for easier plug connection.
Step 3. Slide the battery into the crane stock and tuck the fuse and plug
back into the metal tube.
Step 4. To attach the stock pad you will need to reverse the steps. Press in
on the top tab and pivot inward. Gently press on and make sure not to
damage any parts.
CAUTION: Please be gentle when removing the stock pad. The highlighted
red parts can be broken if abused. The warranty does not cover abuse.
No FUSE