User Manual

VDD3
R1
4.99k
12
TCK
Figure 14. Connection for the JTAG TCK Pin
Characteristics of the Digital Pins
Series 6000 chips provide 12 bidirectional I/O pins that are usable in several different
configurations. These pins provide flexible interfacing to external hardware and access to
the internal timer/counters. In addition to reading the input pins, the application processor
can read the current logic level of the output pins.
The digital I/O pins (IO0 – IO11) have LVTTL-level inputs. Pins IO0 – IO7 also have low-
level-detect latches. The RST~ and SVC~ pins have internal pull-ups, and the RST~ pin
has hysteresis.
See the I/O Model Reference for Smart Transceivers and Neuron Chips for more information
about how to use the digital I/O pins.
Table 16 lists the characteristics of the digital I/O pins, which include the IO0 – IO11 pins,
the memory I/O pins, the Neuron 6000 CP0 – CP4 pins, and the other digital pins listed in
Table 14 and Table 15.
Table 16. Series 6000 Chip Digital Pin Characteristics
Parameter
[1]
Description Minimum Typical Maximum
V
OH
Output drive high at I
OH
= 8 mA 2.4 V — V
DD3
V
OL
Output drive low at I
OL
= 8 mA GND — 0.4 V
V
IH
Input high level 2.0 V — 5.5 V
V
IL
Input low level GND — 0.8 V
V
HYS
Input hysteresis for RST~ pin
and TCK pin
— 300 mV —
I
IN
Input leakage current — — 10 µA
R
PU
Pullup resistance
[2]
13 kΩ
—
23 kΩ
I
PU
Pullup current when pin at 0 V
[2]
130 µA — 275 µA
Series 6000 Chip Data Book 43