Specifications

LONWORKS® LN-Series Network Communication and Interface Guide Technical Bulletin 37
U/10 and U/20 Network Interfaces
The U/10 and U/20 USB Network Interfaces are high-performance LONWORKS
interfaces for USB-enabled computers and controllers. There are multiple steps
required to configure these USB network interfaces (USB to TP/FT-10). This
section briefly describes how to install and use the USB network interface. See the
Network Interfaces section for a description of this network interface. For more
information about this interface, refer to the USB Network Interface User's Guide.
Installing the U/10 and U/20 Network Interfaces
To install the U/10 or U/20 network interface:
1. Insert the U/10 or U/20 network interface installation CD into your computer.
Note: If the installation wizard fails to start, browse through the CD and
double-click OpenLDV210.exe.
2. Follow the instructions in the installation wizard.
Note: After the setup is complete, visit the Echelon Web site to download
software updates at: http://www.echelon.com/downloads
Detecting the U/10 and U/20 Network Interfaces
To detect the U/10 or U/20 network interface, insert the USB network interface
into a free USB port on your computer. The Windows OS automatically detects
and installs the USB network interface.
Figure 31: U/10 and U/20 USB Network Interface