Specifications

LONWORKS® LN-Series Network Communication and Interface Guide Technical Bulletin34
Configuring the i.LON 600 LONWORKS/IP Server
To configure the i.LON 600 LONWORKS/IP Server:
1. From the Start menu, select Echelon i.LON 600 > LONWORKS-IP
Configuration Server. The Echelon LONWORKS IP Configuration Server dialog
box appears (Figure 28).
2. Add the i.LON 600 device:
a. Right-click the Channel and select New Device.
b. Type the desired name.
c. Right-click the device and select Device Properties.
d. Set the IP address and the time zone.
e. Repeat these steps for other i.LON 600 devices.
3. Add your computer as a new device by repeating Step 2a-d.
Note: The configuration server interacts with a computer that has a
L
ONWORKS/IP interface in the same way it interacts with an i.LON 600
device.
4. Right-click the Channel and select Update Members. The icon that represents
the i.LON device and the computer turns green.
Note: LN-Builder 3 must be connected to the network using the
L
ONWORKS/IP network interface; otherwise, the computer icon is red.
Figure 28: Echelon LONWORKS IP Configuration
Server Dialog Box