Specifications

LONWORKS® LN-Series Network Communication and Interface Guide Technical Bulletin 31
Configuring the i.LON 100 xDriver Network Interface
To configure the i.LON 100 xDriver network interface:
1. From the Start menu, select Settings > Control Panel. The Control Panel opens.
2. Double-click the LONWORKS Interfaces icon. The LONWORKS Interfaces
dialog box appears (Figure 24).
3. Click Add to add a new xDriver. The Add Network Interface Wizard appears
(Figure 25).
4. Follow the instructions in the Add Network Interface Wizard to create the new
xDriver.
Note: Connect LN-Builder 3 to a remote network by configuring the Network
Connection Settings to the OnNet Management Mode and Network
Attached set to Yes. For instructions on configuring these settings, refer to
the LN-Builder 3 Technical Bulletin (LIT-12011250).
Figure 24: LONWORKS Interfaces Dialog Box
Figure 25: Add Network Interface Wizard