Specifications

LONWORKS® LN-Series Network Communication and Interface Guide Technical Bulletin 25
8. Click Apply in the LONWORKS Plug’n Play dialog box.
9. Click Diagnostics. The Diagnostics dialog box appears.
10. Click Test. The status and error count from the PCLTA-21PCI and PCC-10
card appears (Figure 16 and Figure 17).
Note: If there is a problem with the network interface, **Failed** appears in
the Diagnostics dialog box (Figure 17). Refer to the network interface
user’s guide to troubleshoot the error.
If the network interface test has no errors (Figure 16), click OK to exit.
Then click OK in the LONWORKS Plug’n Play dialog box.
Figure 16: Diagnostics Dialog Box — Test with No Errors
Figure 17: Diagnostics Dialog Box — Failed Test