Specifications

LONWORKS® LN-Series Network Communication and Interface Guide Technical Bulletin24
Configuring the PCLTA-21PCI and PCC-10 Network Interface Cards
To configure the PCLTA-21PCI and PCC-10 network interface cards:
1. From the Start menu, select Settings > Control Panel. The Control Panel opens.
2. Double-click the LONWORKS Plug’n Play icon. The LONWORKS Plug’n Play
dialog box appears (Figure 14).
3. Verify that the NI Application field is set to PCC10VNI.
4. Verify that the Automatic Flush Cancel option is selected.
5. Click Transceiver. The Transceiver dialog box appears (Figure 15).
6. Select the transceiver type from the Transceiver drop-down menu. The system
retrieves the transceiver configuration selected.
7. Click OK in the Transceiver dialog box.
Figure 14: LONWORKS Plug’n Play Dialog Box
Figure 15: Transceiver Dialog Box